06.03 - Trailside Estates Project Update

Home Browse Search

d- Trailside Estates-City of Pequot Lakes August 7,2007-Punch List of Construction Items Remaining File: 061350 1. Televise the sanitary sewer mains and supply tapes and report to the City of Pequot Lakes. 2. Place Class 1 Aggregate Shouldering on Trailside Road from station 10+00 to 15+51. 3. Construct ditching around the northwest cul-de-sac(station 0+00 to 0+60). 4. Construct by-pass lane on County Road#112. 5. Remove and replace cracked concrete curb and gutter at the following locations: Trailside Road-1+25 left,2+25 right,4+50 right,7+15 right,8+50 right,9+25 right, 9+70 right. Trailside Loop-4+25 right,5+15 right,5+24 right,5+31 right,6+00 right,7+15 left. 6. Remove and replace 15 feet of concrete curb and gutter north of CB 4,station 5+09 to 5+24 left to provide positive drainage to the catch basin. 7. At the Trailside Loop storm sewer outlet: install 15"GS pipe apron,re-grade the rip-rap channel to a concave shape,clean out the sediment in the channel,and add larger rip-rap to the gradation. 8. At the East End(upstream end)of the culvert at Trailside Loop station 0+28: install 15"GS pipe apron and remove sediment from constructed sump area. 9. Remove chunks of concrete that are adjacent to the roads.(See intersection of Trailside Road and Trailside Loop) 10. At the West End(downstream end)of the culvert at Trailside Loop station 0+28: install 15"GS pipe apron,clean out sediments at pipe end,place additional class III rip rap(9"diameter)at the culvert end,and reshape the channel to have a concave shape. 11. Construct rip-rap channel at station 10+00 left. Bituminous spillway appears to slope to the roadway; contractor shall verify positive drainage when constructing the spillway. 12. Retention Pond A storm sewer outlet: install 15"GS apron,remove sediment from the existing channel,and add rip-rap to the pond bottom. 13. Remove sediment at the bottom of the retention ponds to promote percolation. 14. Remove sediment from the catch basins and flow line of the curb and gutter. 15. Verify drainage on the northwest side of the south cul-de-sac(station 6+75). 16. Put fire hydrant at station 6+25 right in service. It presently has an orange covering labeled"Out of Service". 17. Raise elevation of curb stop at Trailside Road station 3+25 left. 18. Shape around the lift station and pave the access drive. 19. Complete site grading and backfilling the curb and gutter. 20. Place seed,mulch,and fertilizer on the entire site. 21. Complete sprinkler system and sod in the park. 22. Complete bacteriological test of watermain. 23. Remove rocks greater than 3"in diameter from the right-of-way. 24. All other work as required by the plans and specifications. Along with these construction items the following items need to be completed as part of your project: 101. Car-Col to submit the Notice of Termination or Subdivision Transfers for the MPCA Stormwater Permit. 102. City to verify if their portable generator can operate the lift station. 103. Landecker&Associates to submit record drawings to the City of Pequot Lakes and WSN. 104. Landecker&Associates to submit testing results to the City of Pequot Lakes and WSN. 105. City of Pequot Lakes to release the Developer's Bond upon completion of project and acceptance of the improvements by the City of Pequot Lakes.