11 - P&Z Admin Report - Laserfiche WebLink

Home Browse Search

d. Once Planning Commission concerns have been addressed, the Planning Commission shall approve the documents and they shall `-- become the controlling documents for the development. 3. Prior to submission of a final plat application, the applicant shall provide a calculation of the projected impervious coverage. This amount shall comply with the underlying zoning requirements. Based on the percentage provided, the City Engineer shall determine the frequency and intensity of storm to be retained on site. This design shall be provided as part of the stormwater pollution and prevention plan. 4. Prior to the submission of a final plat application, the applicant shall submit a stormwater pollution and prevention plan for the property. This plan shall be reviewed and approved by the City Engineer. a. The provisions of this plan shall be fully implemented, and the following shall be abided by: L Erosion control devices shall be in places prior to the commencement of any construction. ii. Following the placement of the erosion control devices, but a minimum of 48 hours prior to any construction or grading on the site, the City shall be contacted to perform an inspection of the devices. iii. Upon inspection by the City, any deficiencies shall be corrected prior to grading or construction. iv. Following each rainfall event during construction, erosion control devices shall be inspected by the developer or a developer's representative on site. The inspection shall be documented in an inspection log, with any deficiencies and corrective actions noted. A copy of this log shall be provided to the City on a monthly basis throughout the construction process. 5. Additional screening shall be provided along County Road 112 within Outlot A to provide a buffer between the traveled roadway and the development. The buffer it to assist in retaining the rural character of the roadway and shall ultimately provide for 75% screening of the structures, during leaf-on conditions, as viewed from the roadway. 6. Prior to submission of a final plat application, the following shall occur: a. The applicant shall submit information showing designs for construction of the roadways and extension of the municipal sewer and water systems. b. The designs shall be reviewed by the City Engineer. Revisions to the plans shall be made to the satisfaction of the City Engineer. c. Once acceptable to the City Engineer, the designs shall be reviewed by the Planning Commission. Revisions shall be made to address Planning Commission concerns. d. Once Planning Commission member's concerns have been addressed, the Planning Commission shall approve the design and it shall become a controlling document for the development.