My WebLink
|
Help
|
About
|
Sign Out
Home
Browse
Search
03.08 & 03.09 - Lockout Tagout Program & Hearing Protection Program
Laserfiche
>
City Council (Permanent)
>
Agenda Packets (Permanent)
>
2007
>
04-03-2007 Council Meeting
>
03.08 & 03.09 - Lockout Tagout Program & Hearing Protection Program
Metadata
Thumbnails
Annotations
Entry Properties
Last modified
6/24/2016 8:14:44 AM
Creation date
6/24/2016 8:14:41 AM
Metadata
There are no annotations on this page.
Document management portal powered by Laserfiche WebLink 9 © 1998-2015
Laserfiche.
All rights reserved.
/
11
PDF
Print
Pages to print
Enter page numbers and/or page ranges separated by commas. For example, 1,3,5-12.
After downloading, print the document using a PDF reader (e.g. Adobe Reader).
Show annotations
View images
View plain text
INTRODUCTION <br /> The Control of Hazardous Energy (Lockout/Tagout) Regulation <br /> The purpose of this program is to provide written procedures that are used by <br /> personnel to effectively control hazardous energy sources while conducting <br /> maintenance and service operations on equipment. The intent of this program is to <br /> comply with the Occupational Safety and Health Administration (OSHA) <br /> lockout/tagout standard (29 CFR 1910.147). <br /> The Lockout/Tagout program is developed so that all potential hazardous energy <br /> sources are identified,isolated, and locked or tagged-out before starting service and <br /> maintenance of equipment where unexpected start up,release of stored energy, or <br /> energization could result in injury or death to employees. The basic provisions of the <br /> program include: <br /> • Establishing an energy control procedure for machines or <br /> equipment that require lockout/tagout. The procedure will <br /> be reviewed on at least an annual basis. <br /> • Providing necessary hardware to isolate,block, or otherwise <br /> `-' eliminate applicable energy sources. <br /> • Providing standardized lockout/tagout devices that are made of <br /> durable material and are capable of withstanding environmental <br /> conditions. These devices will identify the authorized employee <br /> who attached them. <br /> • Locking or tagging energy "cutoff" (isolating) devices before <br /> service or maintenance operations begin to protect employees <br /> from hazardous energy sources. <br /> • Using lockout devices on equipment or a machine whenever it <br /> is able to accept a lock. Otherwise,tagout devices and <br /> additional steps for employee protection are used. <br /> • Identifying authorized employees to lockout or tagout equipment. <br /> Unauthorized persons shall not remove,operate, or tamper with <br /> any lockout and tagout devices. <br /> • Conducting appropriate employee training regarding the lockout/ <br /> tagout program. <br /> This manual contains the checklists, outlines and other forms that will assist the City of <br /> Pequot Lakes in the Lockout/Tagout program. <br /> OSHA/Safety Assistance 05/2005 <br /> Lockout/TagOut <br />
The URL can be used to link to this page
Your browser does not support the video tag.