Laserfiche WebLink
PUD further out of compliance with the basic design criteria. <br /> PUDs where new develepment wMin the PUD ineets the design <br /> develepment serves te bring the entire PUD eleser to eenferming <br /> %iffi the design ei4eria-. <br /> 5. Computing PUD Buildable Area. Buildable Area in a PUD is calculated <br /> using the following procedure: <br /> A. The project parcel is divided into tiers by locating one or more <br /> lines approximately parallel to a line that identifies the ordinary <br /> high water level at the following intervals,proceeding landward: <br /> Shoreland Tier Dimensions <br /> Td Seivere <br /> (feet) {feet} <br /> Sept develop CGD lakes-first tier 200 2e6 <br /> Gen develep GD lakes-second and <br /> additional tiers, 267 267 <br /> RD lakes—all tiers 267 267 <br /> NE lakes—all tiers 400 gee <br /> B. The Buildable Area within each tier is next calculated. This area is <br /> then subjected to the development density evaluation steps to <br /> arrive at an allowable number of dwelling units/sites. In areas <br /> with overlapping tiers due to close proximity f public waters to <br /> each other, topographic divides shall be used to determine which <br /> shoreland standard would apply, and in those areas where the <br /> topographic divide can not be determined, the more restrictive <br /> rules for the area shall be used. <br /> The area .:+i i eaeh fier is next ealeulated, >„1.,.7;..,.aH ,,,+1.,nds, <br /> waters.bluffs, er land belew the ordinary high water level of publie This area is then subjeeted te either the resideflAlial er eeminereial <br /> planned unit develepfneRt density ewiluatien steps te aiTive at an <br /> &Hewable base number of dweRing units or site&. <br /> C. Beyond the second tier, all property is classified as "third tier and <br /> beyond". <br /> 6. Planned Unit Developments. <br /> A. Base Density. <br /> feRews-:—The Buildable Area within each tier is divided by the <br /> Shoreline Residental Buildable Lot Area contained in Section 17- <br /> 5.8, Subpart 3. This calculation determines the maximum number <br /> of dwelling units or sites authorized for each tier. Structures that <br /> straddle tiers shall be rated as part of the tier closer to the ordinary <br /> high water level. <br />