Laserfiche WebLink
Section 17-7.1 SIGNS <br /> 3. Exempt Sign. The following signs can be erected without a permit: <br /> E. Signs in Residential, Agriculture and Forestry Districts, provided they meet the <br /> following standards. <br /> (1) Signs shall not be internally or externally lighted but may be <br /> reflective. <br /> (2) No sign shall be larger than 3 square feet, except for a permitted <br /> home occupation where 6 square feet is allowed, <br /> (3) Only one sign per parcel shall be allowed. <br /> D. Residential Districts including Rural Residential, Transition <br /> Residential, Shoreline Residential, and Urban Residential. <br /> (1) Area Identification Signs are permitted by Conditional use Permit <br /> in the residential districts listed above and must meet the following <br /> criteria: <br /> (a) The size of the sign shall not exceed 32 square feet in area. <br /> (b) The sign shall not exceed eight (8) feet in height, as <br /> measured from the existing ground elevation to the top of <br /> the sign. Any landscaping, grading, structure, or other <br /> material that raises the level of the existing elevation of the <br /> ground shall be included in the height of the sign. <br /> (c) Any such sign shall be erected only on a corner lot at the <br /> intersection of local or collector streets with collector or <br /> arterial roadways and only on property that is a part of the <br /> residential development identified herein. <br /> (d) The sign shall be located on private property at the required <br /> setbacks for the zoning district, as detailed in this Chapter. <br /> Placement of the sign shall include consideration for the <br /> maintenance of appropriate sight lines at the intersection <br /> and shall not constitute an obstruction to traffic in the area. <br /> (e) The sign shall include a landscaping plan to be installed <br /> and continually maintained by the owner of the property on <br /> which the sign is located, pursuant to the requirements of <br />