06.04 Small Wireless Facility Design Guidelines

Home Browse Search

The applicant must include fully d'unensioned site plans, elevation drawings and structural calculations that depict any known existing wireless facilities with a11 existing transmission equipment and other improvements,the proposed facility with all proposed transmission equipment and other improvements, and the legal boundaries of the existing right-of-way and any associated access and utility easements. Fully dimensioned site plans shall indicate the spacing from existing curb, driveways, sidewalks, light poles and any other poles or appurtenances. F. FULL DESCRIl'TION OF NUMBER AND DIMENSIONS OF FACILITIES AND/OR STRUCTURES TO BE INSTALLED The applicant must include a full description of the number and dimensions of all small wireless facilities proposed to be installed and the wireless support structure, either new or existing,to be utilized for each small wireless facility. For all equipment proposed to be installed,the applicant must include: (1)the manufacturer's name and model number; (2)physical dimensions, including without limitation, height,width,depth and weight with mounts and other necessary hardware; and(3) the ambient noise level generated from the equipment,if any. G. OWNER'S AUTHORIZATION For any application to atta.ch a small wireless facility to a wireless support structure , that is not owned by the City,the applicant must submit evidence sufficient to show that either: (1) applicant owns the proposed support structure; or(2) applicant has I obtained the owner's written authorization to file the application. IV. AESTHETIC REQUIREMENTS FOR SMALL WIRELESS FACILITIES A. ANTENNAS , 1. Each small wireless antenna sha11 be located entirely within a shroud or canister type enclosure. 2. The diameter of the antenna enclosure at its widest point should not be wider than two times the diameter of the top of the wireless support structure. The enclosure shall not exceed six cubic feet in volume. 3. All antenna enclosures shall either be mounted to the top of the wireless support I structure pole and aligned with the centerline of the wireless support shucture, or mounted to the side of the wireless support structure such that the vertical centerline of the antenna enclosure shall be parallel with the wireless support ', structure with the height of the side mounted antenna being at a location on the I wireless support structure noted in the application and approved by the City,but I at least 10 feet above ground level at its lowest point. I 3